Proficook PC-GK 1162, Инструкция по эксплуатации

Страница: 56 / 76

56
two screws. Tilt the device carefully
backwards.
CAUTION: CAUTION: CAUTION: CAUTION:
Keep the transport protection for a
possible further transport!
Assembly of the door handle Assembly of the door handle Assembly of the door handle Assembly of the door handle
•
Open the appliance door and slightly
remove the door rubber seal on the
inner door frame. Note the holes
underneath for the positioning of the
door handle.
•
Fasten the handle with the enclosed
screws and bring the door rubber seal
back to its original position.
Electrical connection Electrical connection Electrical connection Electrical connection
WARNING: WARNING: WARNING: WARNING:
•
The installation to the mains supply
must conform to the local standards
and regulations.
•
Improper connection may cause to an
electric shock
electric shock electric shock
electric shock!
•
Do not modify the appliance plug. If
the plug does not fit properly to the
outlet, let install a proper outlet by an
authorized specialist.
•
The accessibility of the power plug
must be ensured to disconnect the
appliance from the power supply in
case of emergency.
•
Make sure that the voltage supply
matches the specifications on the
rating label before connecting.
•
Connect the mains cable to a properly
installed and earthed wall outlet.
•
If the plug after installation is not
accessible, a corresponding discon-
nect device must be available to meet
the relevant safety regulations.
Startup / Operation Startup / Operation Startup / Operation Startup / Operation
Vor der Erstinbetriebnahme
Vor der Erstinbetriebnahme Vor der Erstinbetriebnahme
Vor der Erstinbetriebnahme
Clean the appliance interior including all
accessory parts. Consider the instruc-
tions which we provide in the chapter
“Cleaning and Maintenance”.
Starting the appliance Starting the appliance Starting the appliance Starting the appliance
•
Connect the appliance to the power
supply.
•
Set the desired indoor temperature.
Read the following sections.
Operation
Operation Operation
Operation
1111 2222 3333 4444
Button (1) (1) (1) (1) for control panel activation and
temperature display change