It is important to understand the installa-
tion requirements for your Terminator I/O
system. This will ensure that the Terminator
I/O products work within their environ-
mental and electrical limits.
Plan for safety
This catalog should never be used as a
replacement for the technical data sheet
that comes with the products or the
T1K-INST-M Installation and
I/O Manual (available online at
.) The tech
-
nical data sheet contains information that
must be followed. The system installation
should comply with all appropriate elec-
trical codes and standards.
Unit dimensions and
mounting orientation
Use the following diagrams to decide
if the Terminator I/O system can be
installed in your application. Terminator
I/O units should be mounted horizon-
tally. To ensure proper airflow for cooling
purposes, units should not be mounted
upside-down. It is important to check the
Terminator I/O dimensions against the
conditions required for your application.
For example, it is recommended to leave
2” depth for ease of access and cable
clearance. However, your distance may
be greater or less. Also, check the instal-
lation guidelines for the recommended
cabinet clearances.
48mm
(1.89in)
80mm
(3.15in)
80mm
(3.15in)
48mm
(1.89in)
80mm
(3.15in)
48mm
(1.89in)
89mm
(3.5in)
80mm
(3.15in)
83.3mm
(3.28in)
Power Supply
Network Interface Module
Half-size I/O Module
with Base
System Depth
Full-size I/O Module
with Base
Dimensions and Installation
See the Enclosures
section for an enclosure that may
be suitable for your application
Terminator I/O Environmental Specifications
Ambient Operating Temperature
32°F to 131°F (0°C to 55°C)
Storage Temperature
-4°F to 158°F (-20°C to 70°C)
Ambient Humidity
5% to 95% (Non-condensing)
Atmosphere
No corrosive gases. The level of environmental
pollution = 2 (UL 840)
Vibration Resistance
MIL STD 810C, Method 514.2
Shock Resistance
MIL STD 810C, Method 516.2
Voltage Withstand (Dielectric)
1500VAC, 1 minute
Insulation Resistance
500 VDC, 10 M
q
Noise Immunity
NEMA ICS3-304
Impulse noise 1µs, 1000V
FCC class A
RFI (144MHz, 430MHz 10W, 10cm)
Agency Approvals
UL, CE, FCC class A, NEC Class 1 Division 2
tFED-53
Universal Field I/O
.
