PROFAX PRO-1VS, Руководство пользователя

Страница: 8 / 28

PM 11 90
SECTION 1 SAFETY SIGNAL WORDS
IMPORTANT: Statements identify special instructions necessary for the most efficient operation
of this equipment.
WARNING
WARNING statements identify procedures or practices which must be followed to
avoid serious personal injury or loss of life.
CAUTION
CAUTION statements identify procedures or practices which must be followed to
avoid minor personal injury or damage to this equipment.
The following safety alert symbol and signal words are used throughout this manual to call attention
to and identify different levels of hazard and special instructions.
SECTION 2 SPECIFICATIONS
Images shown in this manual must be taken as a reference and the real unit may
change slightly.
CAUTION
2-1 Serial Number And Rating Label Location
The serial number and rating information for this product is located inside the door. Use rating label
to determine input power requirements and/or rated output. For future reference, write serial number
in space provided on back cover of this manual.
2-2. Unit Specifications
Type of
Input
Power
Welding
Power
Source
Type
Wire Feed
Speed
Wire
Diameter
Range
Input Welding
Circuit Rating
Max. Wire
Spool
Capacity
Overall
Dimensions
Weight
Open-Circuit/
Arc Voltage,
14 - 110
Volts DC
Constant
Voltage (CV)
Or Constant
Current (CC)
DC Power
Source Only
60 50 - 8 ipm
( - 2 1.52 1.6
mpm) Depending
On Arc Voltage
Solid Wire:
.023 - .052 in.
(0.6 To 1.3 mm)
Flux Cored:
.030 - 5/64 in.
(0.8 To 2 mm)
300 Amperes At
100% Duty Cycle
4 Amperes At 00
60% Duty Cycle
45 lb (20.4 kg),
12 in. (304 mm)
Length: 21 in. .5
(5 mm) 46
Width: in. 8.5
(2 mm) 16
Height: 1 in. 7
( mm) 432
3 lb 3
(15 kg)
See Section -3 for detailed wire type, size, and rated speed range 2
TABLE 2-1 Unit Specifications
2-3 Wire Type, Size, and Feed Speed Capability
Motor Speed Wire Type Wire Size Rated Speed Range
Standard All
.023 To 5/64 in.
(0.6 To 2 mm)
50 to 780 ipm
(1.3 -19.8 mpm)
TABLE 2-2 Wire Type, Size, and Feed Speed Capability
1