PROF 501966839, Инструкция по эксплуатации

Страница: 2 / 18

1
Operation instruction GB
Attention: Please read the following instructions carefully to ensure that
mounting operation will be carried out in the right way .These instructions
should be properly preserved for future reference
Ⅰ
.Main construction Data
Type: Rated
Power:
Tempered
Glass
Weight Dimensions Remark:
L3308-
50
50W
φ
186mm
3.6kg 342*295*112mm
Electric shock protection
class:
Ⅰ
External light protection class:
IP54
Rated voltage:220-240V~
50/60Hz
Ⅱ
.Safety instructions
1. The lamp can be used on building sites, engineering workshops and similar applications.
2. The lamp must be earthed.
3. The power cord must be VDE-certified H07RN-F 3x 1.5 mm 2 cable waterproof.
4. Before the maintenance, the power should be switched off. The maintaining should be
done only by a qualified electrician.
5. If the external wire or power cord of this luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person to avoid
the hazard.
6. Check if the stand is stable and it has a firm footing. Ensure cable is not touching any
sharp objects and the mains plug connector is adequately protected against rain or
moisture
Now your lamp is ready for use
7. The two sockets are convenient to use the other electrical equipments. But the output
electricity summation of 2 sockets must be less than 16A.
8. The lamp only can be used with the bracket extended.