background image

MECHANICAL DRAWING

41.0 cm

16.1"

36.0 cm

14.2"

61.0 cm

24.0"

Dual Angle Pole Holder

M10 Flying Point

M10 Flying Point

M10 Flying Point

OPTIONAL ACCESSORIES

USB2CAN

USB PC-PRONET converter

for speaker suspending:

COVERNE12

Loudspeaker so   bag

PLH295

M10 Ø 50 mm Truss mount coupler

FRE300BK

Loudspeaker ground stand

AC169A

M10 black shoulder eyebolt

KP210BK

Sub-Speaker pole

AC171

L = 75 cm /  30 inch Aircra   cable sling

KPPTL12

Loudspeaker wall stand

AC172

L = 1.5 m / 4.9    Aircra   cable sling

KPTFL12PB

Loudspeaker free aiming ground stand

AC173

Screw pin anchor shackle

NAC3FCA

Neutrik Powercon® BLUE POWER IN PLUG

NAC3FCB

Neutrik Powercon® WHITE POWER OUT PLUG

see 

www.proel.com

 for detailed descrip  on and other available accessories.

SPARE PARTS

NAC3MPA

Neutrik Powercon® BLUE POWER IN panel socket

NAC3MPB

Neutrik Powercon® WHITE POWER OUT panel socket

91AMDAXS

Ampli

fi

 er Module (specifying NEOS12AXS 

fi

 rmware)

98NEOS12WZ4

12’’ woofer - 2.5” VC

98DRI1475

1’’ compression driver - 1.75” VC

Содержание NEOS12AXS

Страница 1: ...through the use of sophis cated EQ crossover and dynamics algorithms The CORE processing provides also network func onality through the PRONET control so ware based on CANBUS communica on protocol USB2CAN converter needed The PRONET control so ware provides access to the major processing features including full PARAMETRIC and DYNAMIC EQ advanced COMPRESSOR LIMITERS and DELAY together with the real...

Страница 2: ...cm 30 inch Aircra cable sling KPPTL12 Loudspeaker wall stand AC172 L 1 5 m 4 9 Aircra cable sling KPTFL12PB Loudspeaker free aiming ground stand AC173 Screw pin anchor shackle NAC3FCA Neutrik Powercon BLUE POWER IN PLUG NAC3FCB Neutrik Powercon WHITE POWER OUT PLUG see www proel com for detailed descrip on and other available accessories SPARE PARTS NAC3MPA Neutrik Powercon BLUE POWER IN panel soc...

Страница 3: ... most useful range star ng from 0dB to 20dB with a 6dB a enua on at the centre MODE This bu on select one of the four preset available if it is pressed when the unit is switched on it forces the internal DSP to re assign an ID to the unit for the PRONET remote control opera on FLAT This LED lights when the FLAT preset is selected This is the basic factory preset of the loudspeaker and it can be us...

Страница 4: ...very device has it s own unique ID if you need to add a new device to the network you simply repeat the opera on of step 4 Every device maintains its ID also when it is turned off because the iden fier is stored in the internal memory and it is cleared only by another Assign ID step as explained above This means that if your network is made always of the same devices the assigning ID procedure must...

Отзывы: