3.5 Master/Slave fixture linking
1.Connect the (male) 3 pin connector side of the DMX cable to the output (female)3pin
connector of the first fixture.
2.Connect the end of the cable coming from the first fixture which will have a (female)3
pin connector to the input connector of the next fixture consisting of a (male) 3 pin
connector. Then, proceed to connect from the output as stated above to the input of the
following fixture and so on.
3.6 orientation
This fixture may be mounted in any position provided there is adequate room for
ventilation.
4. Operating instructions
4.1 Navigating the control panel
Access control panel functions using the four panel buttons located directly under the
LCD Display.
Button Function
<MENU>
Used to access the menu or return to a
previous menu option.
<DOWN>
Scrolls through menu options in descending
order.
<UP>
Scrolls through menu options in ascending
order.
<ENTER>
Used to select and store the current menu or
option within a menu.
When a menu function is selected, the display will show immediately the first available
option for the selected menu function. To select a menu item, press<ENTER>.
Press the <MENU> button repeatedly until you reach the desired menu function. Use
the <UP> and <DOWN> buttons to navigate the menu options. Press the <ENTER>
button to select the menu function currently displayed, or to enable a menu option. To
return to the previous option or menu without changing the value, press the <MENU>
button.
4.2 Menu map
DMX Address
(DMX address 001-512)
Perform mode
(Quick or Slow)
Sound Control
(000 sound color or 002 sound strobe)
Pan Reverse
(000 Pan or 001 Pan reverse)
Tilt Reverse
(000 Pan or 001 Pan reverse)
Factory Set
(setting 001 for factory setting)
Reset Set
(setting 001 for reset)
13
