PROEL Four Rays Rainbow, Руководство пользователя

Страница: 12 / 20

12
DMX-512 CONNECTION
The wires must not come into contact with each other, otherwise the fixtures will not work
at all, or not will work properly.
Only use only a DMX cable and 3-pin XLR-plugs and connectors in order to connect the
controller with the fixture or one fixture with another.
Occupation of XLR-connection:
If you are using controllers with this occupation, you can connect the DMX-output of the
controller directly with the DMX-input of the first fixture in the DMX-chain. If you wish to
connect DMX-controllers with other XLR-outputs, you need to use adapter-cables.
DMX-output
XLR mounting-socket
DMX-input
XLR mounting socket
1: ground
2: signal (-)
3: signal (+) 1: ground
2: signal (-)
3: signal (+)
CAUTION:
For all installation, having long signal cables or in the
presence of electrical noise, for example a discotheque, it
is recommended practice to use a DMX terminator: this
assist in preventing corruption of the digital control signal
by external noise. The DMX terminator is simply an XLR
connector with a 120
Ω
(Ohm) resistor connected across
pins 2 and 3, which is then plugged into the DIGITAL THRU
socket on the last projector in the chain. The connections
are illustrated on the right.
Projector 3
Address 11
Projector 2
Address 6
Projector 1
Address 1
DMX-512 Controller