PROEL EIKON series, Руководство пользователя

Страница: 6 / 32

6
INTRODUCTION
Thank you for choosing this PROEL product and for your trust in our brand, synonymous of professionalism,
accuracy, high quality and reliability. All our products are CE approved and designed for continuous use in
professional applications.
DESCRIPTION
EIKON is a series of nearfield studio monitors designed by PROEL R&D team in order to provide to your music
the most honest and accurate reference possible.
From the carefully selected transducers to the proprietary enhanced waveguides and to the low-resonance
cabinet design, everything has been tailored with hours of listening in order to offer the best accuracy over
the whole audio spectrum.
The perfectly optimized electronics, including high-headroom separate Class AB amplifiers for high and low
section, high-precision crossover networks and separate LIMITER circuits, provide maximum resolution and
minimum listening fatigue.
The lineup includes three models, featuring 5.25”, 6” and 8” woofers, and a 10” subwoofer, offering the ideal nearfield
monitor solution for any kind of music production applications: recording studios, home and project studios, broadcast
studios, post-production facilities, mobile production vehicles, home theater, multimedia installations.
EIKON 5 / 6 / 8 INPUT PANEL
1. LINE IN (XLR)
This is a female XLR connector that accepts a
XLR plug from any balanced or unbalanced line
level device. The XLR input is wired as follows:
Pin 1 = shield or ground
Pin 2 = + positive or "hot"
Pin 3 = - negative or "cold"
2. LINE IN (JACK)
This is a female JACK connector that accepts a
JACK plug from any balanced or unbalanced line
level device. The balanced JACK input is wired
as follows:
Tip = + positive or "hot"
Ring = - negative or "cold"
Sleeve = shield or ground
The unbalanced JACK input is wired as follows:
Tip = + positive or "hot"
Sleeve = shield or ground
3. LINE IN (RCA)
This is a RCA female connectors that accept RCA plug from LEFT or RIGHT channel of a line level source.
Each RCA input is wired as follows:
Tip = + positive or "hot"
Sleeve = shield or ground
4. HF LEVEL ADJUST
HF adjustment for a fine control of high frequency response according to personal taste or room
characteristics.