DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT
This marking shown on the product or its literature, indicates
that it should not be disposed with other household wastes at
the end of its working life. To prevent possible harm to the
enviroment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take
this item for environmentally safe recycling. Business users should
contact their supplier and check the terms an d conditions of the
purchase contract. This product should not be mixed with other
commercial wastes for disposal.
GENERAL SAFETY INSTRUCTIONS
Proel S.p.A. declines any liability for damages to objects or persons
caused by lack of maintenance, improper use, installation not performed
with safety precautions and at the state of the art.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
EN54-24 CERTIFICATION
The product is in compliance with EN54
-
24:2008 standard.
CE CONFORMITY
The product is in compliance with CE Directive LVD 2014 / 35 / CE as
stated in EN 60065 standard.
DESCRIPTION
AP52T
is an elegant indoor/outdoor bi
-
directional sound projector
featuring an epoxy coated high
-
grade aluminum extrusion enclosure. It is
equipped with two 127 mm (5”) full
-
range drivers, able to provide an
excellent speech intelligibility with wide dispersion, together with a good
background music reproduction.
AP52T includes a transformer to operate on 100V and 70V constant
voltage systems with three different power taps. In compliance with EN
54
-
24:2008, it includes a ceramic terminal block and a thermal fuse and
it is, therefore, suitable for the use in voice alarm systems.
Thanks to its rugged construction and IP43 protection, this units is suited
for both indoor and outdoor application in malls, exhibition centres,
railway and bus stations, etc.
FREQUENCY RESPONSE
POLAR RESPONSE
TECHNICAL SPECIFICATION
System Type
Bi
-
Directional Sound Projector
Drivers
Dual 5" full range
Rated Noise Power 100h
20 W
Power rating @ 100V
20 / 10 / 5 W
Power rating @ 70V
10 / 5 / 2.5 W
Impedance
500 / 1K / 2K Ω @ 100V
500 / 1K / 2K Ω @ 70V
Connector
Ceramic Terminal block
Power selection
On Terminal Block
Measure Environment
Free Field
Frequency Response (
-
10 dB)
160
-
12k Hz
Sensitivity at 1W (1 kHz, 1m /
4m)
87.7 / 75.7 dB
Sensitivity at 1W (Pink Noise 6dB
Crest Factor, 1m / 4m)
84,7 / 72.7 dB
Max SPL (Pink Noise 6dB Crest
Factor, 1m / 4m)
96.8 / 84.8 dB
Coverage Angle at 500 / 1k / / 2k
/ 4k Hz (
-
6dB)
Hor.: 140° / 160° / 155° / 90°
Vert: 140° / 155° / 150° / 90°
Cabinet
White (RAL 9016)
Material
Aluminium
Environmental Type
B
Protection Degree
IP43C
Operating Temperature
-
25 ÷ +55 °C (
-
13 ÷ +131 °F)
Relative humidity
<95%
Dimensions (mm)
140 x 185 x 200 (W x H x D)
Mounting
brick/concrete on ceilings/wall
Weight
3.45 kg (7.6 lb)
Standard Compliance
EN54
-
24:2008
Certification
0051
-
CPR
-
1998
INSTALLATION INSTRUCTIONS
[1]
Mark on the ceiling or wall the four fixing points (A).
Note: to fix the AP52T to the ceiling or wall choose an appropriate
fastening system for the wall type (no fastening system is provided
with the product). The fixing holes can accept 6mm screws or
bolts (B).
[2]
Remove the top cover of the connection box (C) and insert the
speaker line cables into the cable entries. We suggest to use a
proper speaker cable with two insulated wires in a single jacket,
with diameter between 6mm and 12mm.
[3]
Connect the speaker line wires to the ceramic terminal (D),
choosing the right power to be sent to the speaker and taking care
to follow the +/
-
polarity.
WARNING!
The powers shown on the terminal are referred to
a 100V constant voltage line, in the case of connection to a
70V line, consider that these values will be halved (÷2).
[4]
Close the top cover of the connection box.
[5]
Fix the speaker to the ceiling or wall.
WARNING! Bidirectional sound projectors have both front and
rear sides: the front side is indicated by the arrow and
“FRONT” on a label close to the connection box. All sound
projectors installed in the same line shall have their front side
pointed to the same direction: always verify the proper
loudspeaker aiming.