PRODIM Proliner, Быстрый старт

Страница: 8 / 16

PRODIM 2017 © Proliner Quick start guide - Training preparation Page 8
4.5 Settings:
In this menu you can configure all Proliner measurement settings before starting a measurement.
4. Proliner menu (software)
Projection
In this menu you can configure the 2D projection plane on which your
measurement will be projected.
The number of projection planes:
determine whether a
measurement needs projected on a single 2D plane (
single plane
) or
on multiple 2D planes (
multiple plane
)
Determine the projection plane to be projected on:
choose
horizontal
plane,
vertical
plane
, average
plane, or choose to measure
the projection plane (
first contour
).
Projection plane compensation:
here you can configure whether
the 2.5mm thickness of the pen should be compensated on the
projection plane or not. It is most common to use
offset plane
by
default.
Don’t offset plane
is only used for particular measurements.
Pen
Choose the type of measuring pen used:
Pointer or scanner .
Contour
Choose whether the contour you measure in the drawing should remain
open or is automatically closed .
Compensation
Configure whether the pen thickness should be compensated or not.
Choose: compensate left , compensate right or no compensation .
Watch the video
ATTENTION!
The Proliner is equipped with customer-specific software and licenses.
Menus may differ between different Proliners types.