Manual: Orcabot XXL
Pro 2
version 1.0.1 Mar 2017
27
www.prodim-systems.com
7.3.
Temperature setting on display
1.
Ensure the glass plate is positioned on the bed with the kapton tape on
top.
It is important to print on a clean print bed. Degrease the bed with a cloth and
for instance a little Acetone or Ammonia.
2.
The temperature of the print bed and the extruders can be set in the menu “Extruder”. Press
once on the selection button to go to the main menu. Turn the
selection knob till you are on the submenu “Extruder”. Press again
to go to the extruder menu. A new submenu appears in which
temperatures can be set.
3.
The temperature of extruder 1 and 2 can be set manually. In this
menu you can also set the bed temperature. Press on the desired
option with the selection knob and turn till the desired temperature
is shown on the display. Confirm by pressing again on the selection
knob. By pressing “Turn extr. 1/2 off” the desired extruder
temperature is switched off.
Tip: You can also go to the menu “Control” and select the option “Preheat single extruder/ of
“Preheat all extruder”. This function enables heating one or more print heads simultaneously with a
fixed set temperature. These standard values you can set via menu “Setup” > “Preheat
temperatures”.
Note: The actual temperature of each printhead and bed are represented in the startscreen.
Press on “Back”if you are in a submenu and want to return to the main screen.
Always wait till the desired temperatures are reached before pressing “start”.
Temperature settings for different materials
Actual advised print temperatures of different materials can be found on:
https://www.prodim-systems.com/en-en/Support/manuals.html
> Temperature Settings Print Materials
Prodim offers some information for “temperature settings and materials” as service to her clients and other
interested parties. Despite our best efforts Prodim can and will not give any guarantee regarding this
information. Prodim is not responsible for any damage that might be caused by using this information. Beware
that the operator is solely responsible for the printing process; information from other material suppliers is
often available but also must be verified by the operator.