EN|ENGLISH
7
Electronic volume control ensure smooth start when you start the machine does not
wobble.
Speed adjustment
you can flywheel be stepless in the range of 1200 to 2500rpm.As a result, it's easy to
choose a different grinding speed based on different materials.
7.3 Replacing grinding stick pan
※
The Allen wrench (S5) is inserted into the hexagon socket of the output shaft.
※
firm always grinding disc, and turn it clockwise Allen wrench to remove the specified
new grinding disc installed on the machine.
※
tighten the grinding disc , hand polished disc rebound test is normal.
7.4 Ancillary materials
the order of the self-adhesive sandpaper according to the grinding disc on. Grinding
disc of fastener surface will be firmly self-adhesive sandpaper in place. Make sure the
hole with self-adhesive sandpaper grinding disc in the hole with the welcome home.
When the self-adhesive sandpaper abrasion, try to change a new.
7.5 LED lighting
When the switch to the on position, the LED will open, so that the operator in the dark
under the environment to work properly, and you can view real-time effects processing
polished walls.
8 Operating the machine
Do not grip the machine head. Use both hands gripping the machine.Before operating
the machine, make sure the dust bag has been installed
- The machine is connected to the main power supply.
- Before turning to make the disk slightly away from the work surface.
- Turn on the machine, adjust the suction power adjustment wheel based on the actual
grinding speed. The higher the speed, suction adjustment wheel indicator arrow shall
turn the small end; on the contrary, suction adjustment wheel indicator arrow shall turn
the big end.
- Carry out the necessary grinding work.
- Do not over-pressing machine! Pressed with moderate pressure get the best grinding
results. Grinding effect and quality depends on selecting the correct abrasive material.
- The unit has a self-cleaning device, please timely treatment dust bag dust inside, so as
not to affect the self-cleaning effect.
- Upon completion of the grinding task, turn off the machine.
9 Service and Maintenance
In front of the mill maintenance to remove the power plug, cut off electricity source.
No need to open each of the motor housing maintenance repairs only it can be
authorized by the company's customer service department.
※
regularly check the power plug and, if there is damage, please go to an authorized
repair shop for replacement
※
In order to ensure constant air circulation, always keep the vents clean and
obstructions on the motor housing.
※
regular cleaning contacts slippage. Do not use hard objects to clean.
