EN|ENGLISH
4
interfere with equipment operation. Please use the equipment before servicing
damaged parts. Many accidents are improper maintenance by the electric tool caused.
F) Keep cutting tools sharp and clean. Careful maintenance of the front edge sharply
the tool is clamped and easy to control.
G) Use meet the above described requirements and the special device type power
tools, accessories, replacement tools, set operating ring environmental and operational
considerations will be taken into account. Failure to follow the instructions above it
requires the use of power tools can cause dangerous situations.
Serves
Please ensure that only authorized by the professionals use original replacement parts
to repair your equipment. Which would ensure long-term security.
5.2 Safety instructions associated
- The machine is designed for grinding. Please read the safety information, instructions,
illustration and description of all machines shipped. If you do not follow instructions,
electric shock, fire or serious injury can result.
- Do not use the machine for example roughing, brushing 'sanding or grinding disc
such work. Machine design task execution is not carried out, it could lead to danger
and injury.
- Do not use specially developed and intended for attachment of the machine.
Otherwise, installed on your machine parts can not guarantee non-hazardous
operation.
- Allow accessory speed must be at least as high as the maximum speed specified on
the machine. Speed exceeds the allowable value of the attachment may be broken.
- Sanding pad, flanges, the inner diameter of the support plate and all other
accessories must be in full compliance with the machine spindle. Annex diameter circle
will lose inappropriate, excessive vibration, and lead to loss of control.
- Do not use a damaged accessory. Before use, always check that you have nicks or
cracks, such as sanding pad, and check that the support plate for cracks and excessive
wear. Before each machine fall, check the machine and accessories are damaged, or
install attachments intact. After checking and assembly accessories, ensure that
everyone outside the range of rotation of the tool and the machine running at
maximum speed for one minute. In the test of time, damage to the attachment usually
completely broken.
- Wear personal protective equipment. Depending on the application, using the shield
or goggles. If possible, wear a small abrasive member adapted to prevent strikes or
processing breathing masks, protective gloves and safety earmuffs work aprons.
Goggles must be able to block caused by a variety of operating and flying debris.
Breathing masks or equipment must be able to filter particles up at work. Continued
exposure to loud noise can cause hearing loss, always wear ear protection is good.
- Make sure the work area of the machine and the person standing close to some safe
distance. All the staff work area must wear personal protective equipment. Accessories
work piece may fly or damage, and led to casualties outside the working area.
