www.usaprocom.com
200020-01A
22
OPERATION
Key Settings
ON
- Operates unit to on position, manually
operated solenoid ON.
OFF
- Operates unit to off position, manually
operated solenoid OFF.
MODE
- Changes unit from manual mode to
thermo mode.
SET
- Sets temperature in thermo mode.
ROOM SET TEMP
1
4
6
2
3
5
Figure 22 - Remote Control
Figure 23 - Remote Control Display
Figure 24 - Manual Mode in ON Operation
Figure 25 - Manual Mode in OFF Operation
TEMP
TEMP
TEMP
TEMP
LCD Liquid Crystal Display
1.
DISPLAY
Indicates CURRENT room
temperature.
2.
°F or °C
Indicates degrees Fahrenheit or
Celsius.
3.
FLAME
Indicates burner/valve in operation.
4.
ROOM
Indicates remote is in THERMO
operation.
5.
TEMP
Appears during manual operation.
6.
SET
Appears during time the of setting
the desired temperature in the thermo
operation.
Setting°F/°C Scale
The factory setting for temperature is °F. To
change this setting to °C, press the ON key
and the OFF key on the remote control at the
same time (see Figure 22). This will change
from °F to °C. Follow this same procedure to
change from °C back to °F.
Manual Function
To operate the system in the manual “MODE”
do the following.
ON OPERATION
Press the ON key and the appliance flame will
come on. During this time the LCD screen will
show ON (see Figure 24).
After 3 seconds the LCD screen will default to
display room temperature and the word TEMP
will show (see Figure 24). The flame icon will
appear on LCD screen in manual on mode.
OFF OPERATION
Press the OFF key and the appliance flame
will shut off. During this time the LCD screen
will show OF (see Figure 25).
After 3 seconds the LCD screen will default to
display room temperature and the word TEMP
will show (see Figure 25).
THERMOSTAT FUNCTION
Setting Desired Room Temperature
The remote control system can control the
thermostat when the transmitter is in the
THERMO mode. The word ROOM must be
displayed on the screen.
To set the THERMO MODE and desired room
temperature:
TEMP
