www.usaprocom.com
5
200498-01A
ASSEMBLY INSTRUCTIONS
Figure 9
Figure 10
Figure 11
BB
E
Lintel
E
A
BB
4. Slide fireplace hood assembly (A) over
mounting brackets (E). See Figure 10.
3. Use the 4 masonry screws (BB) provided
to fasten the brackets to the lintel (see
Figure 9).
INSTALLING HOOD TO MANUFACTURED FIREPLACE
WARNING: Many manufac-
tured fireplaces have louver
openings for ventilation. Do not
cover any louver openings with
fireplace hood. Do not mount
fireplace hood above any louver
openings. Only mount fireplace
hood below louver openings.
Covering louver openings or
mounting fireplace hood above
louver openings will cause the
fireplace to overheat and could
cause property damage, per-
sonal injury, or death due to fire.
You may need to alter or discard the mounting
brackets to install the fireplace hood to the
manufactured fireplace.
Installing Above Manufactured
Fireplace Opening
1. Cut mounting bracket off at point "X" (see
Figure 6, page 4).
2. Tape mounting bracket (E) to fireplace
housing. Make sure top of mounting
bracket is 6" above fireplace opening (see
Figure 11).
3. Mark screw locations through slots in
mounting bracket (E).
4. Remove mounting bracket (E) and drill a
1/8" diameter hole into fireplace housing
at each marked location.
5. Use the 4 metal screws (AA) provided to
fasten brackets to fireplace housing (see
Figure 11).
6. Slide fireplace hood assembly (A) over
mounting brackets (E) (see Figure 11).
IMPORTANT: Tape must be removed before
operating the fireplace.
E
6"
AA
A
Manufactured
Fireplace
Fireplace Opening
IMPORTANT: Tape must be removed before
operating the fireplace.
