1. Connect the pyrometer: - automatically (search)
- manually (select COM
à
connect)
2. Temperature display:
- numerically (as on the pyrometer)
- graphically (displayed in time)
3. Digital inputs / outputs:
- shows active inputs or outputs
4. Set measuring parameters: - measuring relevant
- rarely required
( to extend)
5. Save measuring parameters: - save all values under a file name
6. Alignment:
- switching on / off laser targeting light
(Icons device-dependent) - configure monitor settings of the camera module
- set measuring distance at motorized focus
7. Graphic presentation:
- customize view in the data recording window
- select view graphs
8. Record data:
- save measurement data incl. all parameters
- customize recording settings
- show measurement information
- playback and analyze in the viewer
9. Configuration Files:
- save complete pyrometer configurations
(setups) and activate them on the PC or
externally via digital inputs
10. Device configuration:
- perform basic device settings
- limit temperature range if necessary
- adapt analog outputs to terminals
- assign functions to digital inputs / outputs
- test analog and digital outputs
- access service functions
- configure interface and data collection settings
- adjusting the pyrometer to a specific measuring temperature value (single-point adjustment)
Measuring temperature
DT: read out device temperature
IN: digital inputs , OUT: digital outputs
Port not activated, inactive, active
Select measurement parameters
or type in or via
quick adjustment (active field)
Save pyrometer parameters in file
Load parameters from file
Parameters are read from pyrometer
Parameters of currently loaded file
Scale per mouse click
Scale per entry
Scale with mouse drag
Adapt to pyrometer’s temp. range
Automatic scale (selected graphs)
2
3
4
5
6
1
10
Laser targeting light
Measuring distance at motorized focus
Monitor settings of camera module
PROCESS SENSORS CORPORATION
IR Temp. Sales Office: 787 Susquehanna Avenue, Franklin Lakes, NJ USA • Tel: 201-485-8773 • Fax: 201-485-8770
Corporate Headquarters: 113 Cedar Street, Milford, MA USA • Tel: 508-473-9901 • Fax: 508-473-0715
www.ProcessSensorsIR.com • [email protected]
A KPM Analytics Company
Process Sensors reserves the right to make changes in scope of technical progress or further developments.
Quickstart-Manual_M3_H3_RadiationPyrometers_12-pin
(Feb 14, 2017)
9
7
8
