Process Sensors MCT 300, Инструкция по установке и эксплуатации

Страница: 66 / 75

F2= F2=c f.ff where c is constituent 0-1
F2?
MOIST?
MOIST?c c=const 0 or 2, where 0 = constituent 1 (e.g. moisture) and 1 = constituent
2 (e.g. oil or coat weight), fault status of 3 hex digits is appended.
CDRV= Take over cooler drive.
CDRV? Read cooler drive (volts)
CTARG= Cooler target volts typically 3.2. Note volts increase with colder temp.
CTARG?
DIG=
Set display digits 0-3
DIG?
C1= C1=c f.ff where c is constituent 0-2 C values are the constants applied to each filter
value in the algorithms.
C1?
C2=
C2=c f.ff where c is constituent 0-2
C2?
C3=
C3?
C4=
C4?
C5=
C5?
C6=
C6?
AVG?
AVG?c c=0 returns MOISTURE avg c=1 returns OIL
DUAL= DUAL=1 for dual constituent, DUAL=0 for single constituent
DUAL?
PROD= PROD=c ppppppppp where c is the Cal Code 0-9 or 50 depending on version and
ppp is a string of 9 characters.
PROD? PROD?c returns the string for the selected Cal Code
(Constituent variable is 0-1 for 2 constituent software and 0-2 for three constituent)
Maximum/Minimum values (RS232/485 Commands)
ZERO – 9999 (float)
SPAN – 99 999999 (float)
F1, F2 and C1 to C6 -9999 to + 9999 (float)
DAC 0-10v (float)
GAIN 1-255 (integer)
DAMP 99 (integer)
CAL 1-9 or 50 depending on version (integer)
63