© 2017 Proceq SA
21
20
© 2017 Proceq SA
9.2 Adjusting the Settings
Each of the settings (statistics method, conversion curve, unit and correction factor) that were used in
the RockSchmidt at the time of the measurement series can be adjusted subsequently in RockLink.
This can be done either by right clicking directly on the item in the appropriate column, or by click-
ing on the blue setting item in the detailed view of a measurement series. In each case a drop down
selection box will appear with the choice of setting.
9.3 Adjusting the Time Stamp
Right click in the “Date & Time” column.
The time will be adjusted for the selected series
only.
9.4 Exporting Data
RockLink allows you to export selected series or the entire project for use in third party programs.
Click on the table of the measurement series you wish to export. It will be highlighted as shown.
Click on the “Copy as text” icon. The data for this measurement series is copied to the
clipboard and can be pasted into another program such as Excel. If you wish to export
the individual impact values of the series you have to display them by clicking on the
double arrow icon as described above before you “Copy as text”.
Click on the “Copy as picture” icon – For exporting the selected items only into another
document or report. This performs the same action above, but the data is exported in
the form of a picture rather than as text data.
“Export as text” icon – Allows you to export the entire project data as a text file that
can then be imported into another program such as EXCEL. Click on the “Export as
text” icon.
This will open the “Save As” window where you can define the location in which you wish to store
the txt file.
NOTE! RockLink has two „tabs“ with two display formats. “Series” and “Summary”.
When performing this operation the project data will be exported in the format defined
by the active “Tab”, i.e. either in “series” or “summary” format.
To open the file in Excel, locate the file, right click on it and “Open with” – “Microsoft Excel”. The
data will be opened in an Excel document for further processing. Or drag and drop the file into an
open Excel window.
9.5 Deleting and Restoring Data
The menu item “Edit – Delete” allows you to delete one or more selected series from the down-
loaded data.
NOTE! This does not delete data from the RockSchmidt, only data in the current project.
The menu item “Edit – Select all”, allows the user to select all series in the project for exporting etc.
Restoring original downloaded data
Select the menu item “File – Restore all original data” to restore the data to the original format as
it was downloaded. This is a useful feature if you have been manipulating the data, but wish to go
back to the raw data once again. A warning will be given to say that the original data is about to be
restored. Confirm to restore.
NOTE! Any names or comments that have been added to series will be lost.
Deleting data stored on the RockSchmidt
Select the menu item “Device – Delete all Data on Device” to delete all data stored on the Rock-
Schmidt. A warning will be given to say that the data is about to be deleted on the device. Confirm
to delete.
NOTE! Please note, this will delete every measurement series. It is not possible to delete
individual series.
9.6 Further Functions
The following menu items are available via the icons at the top of the screen:
“Upgrade” icon – Allows you to upgrade your firmware via the internet or from local
files.
“Open project” icon – Allows you to open a previously saved project. It is also pos-
sible to drop a .roc file onto RockLink to open it.
“Save project” icon – Allows you to save the current project. Note: this icon is greyed
out if you have opened a previously saved project.
“Print” icon – Allows you to print out the project. You may select in the printer dialog,
if you want to print out all of the data or selected readings only.
