probst FTZ-MULTI, Руководство по эксплуатации

Страница: 50 / 61

Operation
18 / 25
V1
GB
7.2 Picture of the automatic release
The device is mounted with a automatic release, that means the opening and closing of the gripping arms results
through the set down and lifting of the device.
Pictures the positions of the automatic release
  
A
●
Device is lifted through the lifting
equipment/carrier.
●
Gripping arms are opened.
●
Device is set up on the gripping
good.
●
Gripping arms are opened.
●
Device is lifted through the lifting
equipment/carrier.
●
Gripping good is clamped and can be
transported to the destination.

B
 
/

●
With faulty switching, the
change-over switch must be
pushed back manually (e.g. with
a screwdriver).
1)
●
Device is set down with the
gripping good (on the ground).
●
Gripping arms are opened.
●
Device is lifted through the lifting
equipment/carrier.
●
Gripping arms are opened.
(laydown position of the device on the
ground)
1)
Otherwise there may be faulty switching and when setting down the load this can cause deformation or
damage of the automatic release !
The jerky lifting and lowering of the device with and without load. e.g. caused through driving fast with the
lifting equipment/carrier over uneven grounds is
forbidden.