Operation
12 / 14
58500009/58500010/58500011
V3
GB
4.3.4
Replace battery
•
To remove the battery from the unit (FXAH-
120), slide the battery clip forward (away from
the handle).
•
The battery can now be removed from the top
of the battery compartment.
•
To reinsert a battery into the unit (FXAH-120),
insert the battery into the battery compartment
and slide the battery clip backward (toward the
handle) to secure the battery.
4.3.5
Charging the battery
The battery is supplied with the device in a partially charged state and must be fully charged before first
use.
The charging time is approx. 2 hours. When the battery is fully charged, the operating time of the vacuum
pump is approx. 1.5 hours.
The batteries can be charged at any time without reducing their service life. Interrupting the charging
process will not damage the batteries.
Only the supplied battery charger may be used!
•
Make sure that the mains voltage corresponds
to the data on the charger's type plate.
•
The charger may only be used in a dry
environment.
The charger is
not waterproof
!
•
Keep the battery away from flammable objects
during charging!
•
Connect the mains plug of the charger to a
socket.
•
Connect the charger to the battery.
•
The battery is charged as soon as it is
connected to the charger.
•
The charging process is automatically
terminated when the battery is fully charged.
