Steering Dual Rate:
1. Power ON the transmitter.
2. Power ON the boat.
3. Apply either the left or right steering input on the transmitter
and hold that position.
4. To add or remove steering throw input, hold the steering input
button and press the (+) or (–) ST DR button.
Throttle Dual Rate:
1. Turn ON transmitter.
2. Turn ON the boat.
3. Apply either forward or reverse throttle input on the transmitter
and hold that position.
4. To add or remove throttle input, hold the steering input button
and press the (+) or (–) ST DR button.
NOTICE:
Adjusting the throttle input will negatively affect the self
righting feature as it relies on the motor RPM.
NOTICE:
Do not adjust the throttle dual rate while the boat is
powered on and resting on a stand. Adjusting the throttle dual rate
may power the motor, which could cause damage to property or
personal injury.
Adjusting the Dual Rates
The transmitter allows you to adjust steering and throttle dual rates.
1. Connect the battery to the ESC.
2. Power on the ESC switch.
3. Power on the transmitter.
IMPORTANT:
Perform a control check at the beginning of each
boating session, after repair or after installation of a new battery.
Ensure that the battery is fully charged.
1. With the transmitter and boat powered ON, place the boat on the
boat stand.
2. Turn the transmitter STEERING WHEEL to the LEFT and to the
RIGHT to verify the jet nozzle is in sync with the steering input.
3. Pull the THROTTLE TRIGGER. The coupler should rotate to the left.
Air will flow from the jet nozzle.
Control Check
Getting Started
7
EN
9-INCH READY-TO-RUN SELF-RIGHTING JET BOAT
3
2
1
