Installing the Battery Pack
Placing the Decals
Apply the Sprintjet decals according to the diagram.
E
F
C
H
H
L
E
F
C
H
H
L
4
EN
Sprintjet
1. Remove the canopy from the hull by rotating the canopy latch
to the left or right and pulling up on the back of the canopy.
2. Install the fully charged battery in the compartment by
securing it into the battery cradle with the battery cable
toward the front of the boat.
3. Turn the battery hold down arm to secure the battery in place.
4. Connect the battery to the ESC/Receiver.
• Pro
Boat
®
Sprintjet
™
9-Inch RTR Self Righting Jet Boat
• Pro
Boat
®
2.4GHz Transmitter (HRZ00001)
• Pro
Boat
®
3-in-1 ESC/Receiver (HRZ00005)
• Pro
Boat
®
Servo (PRB18033)
• Dynamite
®
7.4V 600mAh 2S 20C Li-Po Battery (DYNB6223)
• USB Charger (PRB18019)
Box Contents
