Probewell MT-1/WT3, Руководство пользователя

Страница: 79 / 86

Probewell Lab Inc.
Page • 78
FAULT DESCRIPTION FIX
METER NOT
INSTALLED
The socket is not
detecting the meter
current elements and a
message
meter not
installed is displayed in
the web page interface.
•
Make sure the meter tabs are
fully plugged in MT-1/WT3
front jaws.
•
Check if the front jaws of the
MT-1/WT3 socket are clean
and in good condition.
•
Check the meter’s contacts
for good condition and
cleanliness.
•
Try another meter.
•
Turn off and on the
MT-1/WT3 and start again.
METERCAM IS
NOT
SYNCHRONIZED
WITH THE DISK
The Metercam is not
detecting correctly the
black flag on the disk.
•
Make sure the Kh correspond
with the one indicated on the
nameplate of the meter.
•
Reposition Metercam and
start test over again.
METERCAM KEEPS
ON SCANNING
WITHOUT
FINDING THE DISK
The Metercam is not
detecting the black flag
on the disk of the meter
being tested.
•
Check if the disk is turning.
•
Check the disk of the meter is
in the Metercam disk zone.
•
Check that the suction cups
are adhering properly on the
meter face. If needed, lightly
wet the suction cups.