Probewell MT-1/WT3, Руководство пользователя

Страница: 30 / 86

MT-1/WT3 User Guide
Page • 29
PF and one for LL. A fourth test result is available, showing the weight average
according to the formula (4HL+2LL+PF)/7.
Then, the tests results can be saved
Before being saved, the operator must enter the meter ID if the meter ID was not
already entered or scanned and answer to up the 8 custom questions saved in the
WT3.
Please note that if you had chosen the Full Test mode in this example, the test would
have continued, checking each of the phases A, B, C, one after the other under the
HL, PF and LL loads.
Remark: To speed up the test in Full Test mode, the LL and/or the PF load can be
disabled using the Settings tab.
In the Full Test mode, once the test of all phases ABC together is completed and the
test of each phase has begun, you can cancel the test at any time by pressing STOP
TEST.