13
This section is provided as a reference only. Please consult
your dealer regarding the best choice of HBA/RAID controller
for your media requirements.
Qualified Host Adapers & RAID Controllers
All HBA/RAID controllers are cross platform for Mac & PC
HighPoint Technologies - RR2314
PCI-e Port Multiplier HBA controller for Mac & PC. Four E-SATA (PM interface ports.
Supports 3Gb SATA disks only.
JBOD, OS Striping (RAID-0), Hardware RAID-0/RAID-5
Silicon Image - SI3124
PCI-e Port Multiplier HBA controller for Mac & PC. Four E-SATA (PM) interface ports.
Supports 3Gb SATA disks only.
JBOD & OS Striping (RAID-0)
Sonnet Technologies - E4P/X4P
PCI-e & PCI-X Port Multiplier HBA controller for Mac & PC. Four E-SATA (PM) interface ports.
Supports 3Gb SATA disks only.
JBOD & OS Striping (RAID-0)
12
This section covers some common support questions.
If you are experiencing an urgent issue, please contact
your dealer or visit us online at www.proavio.com
Troubleshooting
Connection Problems:
Always double check for loose cable connections or improperly seated disks
if you experience problems where a disk or volume does not appear in your
computer, or you recieve an error message stating a disk missing
when you have the drives configured as a RAID set.
1. Disconnect the data cables and reconnect each cable one at a time,
ensuring each connector is inserted securely in your EB8PM.
2. Make sure the connector is properly secured on your HBA.
3. Check your EB8PM’s drive presence LEDs, located on the front
panel of your EB8PM. If the LEDs are not lit, remove the disk and
reinsert the disk module.
If the problem persists, please contact your dealer or contact Proavio’s support department
at 562-777-3488
.
10
Connecting Your EB8PM - Host Workstation
After connecting the cable to your EB8PM, connect the opposite end of the cable
to an open port Port Multiplier HBA or RAID controller. Firmly push the cable
into the available E-SATA port. Always double check for proper cable insertion.
NOTE: Never try to insert a non-locking SATA connector to a locking E-SATA port.
Doing so will damage your EB8PM, and may cause damage to your computer.
Figure 6.
Figure 7.
E-SATA
[PM]
11
After connecting both cables to your EB8PM and host workstation, power-on
your EB8PM first, then power-on your host computer. Your array is now ready
for RAID configuration. To learn more about RAID configuration, please refer
to your HBA or RAID controller’s documentation.
Finished
Figure 8.
E-SA
T
A
E-SA
T
A
FULL R
ANGE
DISKS 1-4
DISKS 5-8
FULL R
ANGE
DISKS 1-4
DISKS 5-8
On Off
WARNING
:
To minimize the chance of
electrical shock, always follow proper
safety rules when working with
electrical materials.
EB8PM
Quick start guide
EB8PM | ESATA Storage Array with Port Multiplier Technology
PROAVIO
TM
