2
1
Thank you for choosing Proavio
Carefully unpack your EB8PM storage system, and inventory the
accessories according to your model type.
What is in the box?
3
Unpack all components including the HDD mounting screws, key sets and
cables. If you are missing any of the items mentioned above, please contact
your dealer or contact proavio at www.proavio.com.
Unpack your editBOX
Welcome
Thank you for buying editBOX EB8PM, the first professional Port Multiplier storage
solution designed for high resolution digital media production, and general high
performance storage requirements.
Standard IEC Power Cable -
Qty 1
1 Meter E-SATA Cable -
Qty 2
HDD Key Set -
Qty 2
Hot-swap Disk Trays -
Qty 10
EB8PM SATA Disk Array -
Qty 1
HDD Mounting Hardware -
Qty 40
Double-box Package -
Qty 1
PROAVIO
TM
PROAVIO
TM
E-SA
T
A
FULL R
A
NGE
DISKS 1-4
DISKS 5-8
POWER
STATUS
4
Disk Installation
If your EB8PM was purchased with capacity, please skip this section and
immediately go to section 5. If your EB8PM was purchased without disks,
install each disk into the provided disk trays and fasten using the supplied
hdd screws. Do not use any other mounting screws other than the ones provided
with your EB8PM. System or disk damage may occur if using non-approved
mounting hardware.
5
Insert Disk Module
After fastening each disk, insert the disk trays in the open disk bay on your
EB8PM. For added security, your EB8PM is equipped with locking disk
bays to prevent accidental or malicious disk removal.
Hard Disk
Disk Tray
+
+
+
+
NOTE: Push right to unlock
Figure 1.
Figure 2.
Disk tray - Bottom view
EB8PM
Quick start guide
EB8PM | ESATA Storage Array with Port Multiplier Technology
PROAVIO
TM
Figure 3.
C
C
Gently “press” tray handle to insert HDD
