3
English
Operation
1. Make sure that the inflatable pool toy is laid on a level surface free from stones and
sharp objects.
2. Only use a foot pump or hand pump to inflate the pool toy.
Note:
Do not use compressed air; the pool toy cannot withstand high pressures.
3. Make sure that all the valves are properly closed after inflation.
4. To deflate the pool toy, pinch the valve to open the non-return valve. The valve can
be kept open with a thin (not sharp) object. Be careful not to damage the pool toy.
Care and maintenance
If the pool toy is not to be used for a long time
• Make sure that it is clean and dry.
• Store it in a dark and cool place, but no cooler than +5 ºC.
• Make sure that pool toy cannot be damaged by any sharp objects.
Small holes can be repaired using the provided patch
1. Localise the leak.
2. Drain the pool toy of air.
3. Clean the area around the leak and make sure it is dry.
4. Cut the repair patch to the correct size and press it over the hole.
5. Allow the repair to dry for 24 hours before using the pool toy again.
6. If the puncture/hole is larger than 2.5 cm (1 inch), use a silicon- or rubber-based
adhesive to apply the supplied or other suitable repair patch over the hole.
Read the instructions on the adhesive and make sure it is suitable for inflatable
pool toys.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.
Specifications
Size
196 × 110 cm
Age limit
3 years
