4
•
Slide the camera plate by pressing the push
pin of the Fluid head and then remove the
plate.
•
Attach the camera plate by matching it
properly with the threads of the Spinhawk.
•
Attach the castle ring at the bottom of the
fluid head and then tighten it properly.
•
Remove the castle ring of the Fluid Head
(Not
Included)
and mount it on the stand
(Not
Included)
.
NOTE:
You can use it with a heavy fluid head to
get impressive footage with smooth pans,
controlled tilts, and seamless transitions.
•
Attach the Rod Adapter by properly matching
it with the threads of the top plate and
properly tighten it using the screw driver
(Not
Included)
.
Mounting of Fluid Head
Assembling of Rod Adapter
NOTE:
There are 15mm rods support complete
your setup with accessories like a matte box
and follow focus & lens support.
