2
2.
Safety Hints
•
Do not start operating the head until you have read and understood the operating instruction.
•
The assembly of the head should be done with extreme caution.
•
Lack of attention while assembling the head can cause substantial damage to equipment/operator.
•
The head should be operated on a stable surface.
•
To prevent any harm to your camera, make sure you securely place and lock your camera setup.
•
A balancing knob and locking lever are integrated into the head to lock the camera setup securely.
•
The locking levers on the head ensure that the top and bottom plates holding the camera are both
locked.
•
If they are not locked, there is a risk of the camera slipping due to the loosening frame.
•
Make sure you do not exceed the maximum payload capacity. Otherwise, it may cause severe damage to
equipment.
