PROAIM P-SFT-DT-12, Инструкция по сборке

Страница: 2 / 4

2

Remove the outboard set of screws from the
sections using a wrench, slide extension
section into each end to complete a 12' run,
install and tighten the screws to secure.

Attach the Track Supports, and Track Riser
Supports to the track.

Note: Track Supports offers rigidity and
prevent dolly from running off the rails.

The track is now ready to use.

Remove the lock knob from the 27" central
section and connect the 32" dolly rods to give
it a triangular shape.

Attach the 27" rod to the wheelset and
tighten the knob to secure.
Track Setup

Loosen the lock knob from the 32" rods of the
dolly section, connect with 27" of central area,
and tighten the knob to secure.

Attach the 14" central support system rod to
the base and tighten the screws to secure it.
Swift Dolly Setup
E to E
C to C