PROAIM Fly 22, Инструкция по эксплуатации

Страница: 13 / 16

13
Joystick

The joystick may be operated hand held, from a flat surface like a table top or attached to the
boom arm of the jib.
PROAIM ™ Sr. PAN TILT HEAD Digital only

Attach the 4-pin power cord to rear of
joystick box.

Attach the four pin male connector of
cable to the four pin female connector
of head for panning & tilting.

If the joystick control is opposite, undo
the connectors at the motors, rotate
180 degrees and re-install.

Loosen the knob of accessory bar and insert the rod and tighten the knob properly .