4
Mount Fluid Head on the Bowl Adapter
After mounting the fluid head on the bowl,
secure it properly by inserting the locking
knob from the bottom side.
To mount the flat plate, first remove the
75mm bowl adapter from the dolly platform.
For this, use an Allen key, loosen all the screws
and then take out the 75mm bowl adapter.
Mount the flat plate on the dolly platform,
then insert the screws by aligning to the
bottom and properly tighten.
After properly securing the fluid head
(Not
Included)
,
mount
a
camera
(Not
Included)
on it.
NOTE: Breeza Dolly Slider is sturdy enough to
take a massive payload. And the end-clamps
mount tripods and light stand in seconds. It also
includes soft-grip rubber ball feet, support
bracket, and safety wheels that give overall
secure, leveled & greater performance.
Insert the fluid head
(Not Included)
into the
bowl through a screw.
Mount the fluid head
(Not Included)
onto the
flat plate and to properly secure, insert a bolt
from the middle/centre of the bottom, as
shown in the image.
