background image

 

 

Operating instructions SPEEDY F1 

 

5

 

However, please check it immediately on 
receipt, preferably in the presence of the 
freight company, for any damage which has 
occurred in transit. If you are of the opinion that 
damage has occurred during transit, please do 
the following:  

1.  Record a statement of the facts – the 

freight company is required to do so.  

2.  Preparation of a declaration of assignment, 

you assign all claims from this damage to 
the supplier. 

3.  Return the shipping note, the statement of 

facts and the declaration of assignment to 
PRO ACTIV. 

Failing to observe this instruction, or reporting 
damage after acceptance, means that the 
damage cannot be recognised. 

 

5 Introduction 

 Before starting your journey, familiarise 

yourself with these operating instructions 
paying particular attention to the safety 
information and hazard warnings contained 
within them. 

 Allow your therapists and doctors to 

advise you, your carers and assistants, on how 
to use the product and what you are safe to do 
with the product based on your current ability. 
Clarify with them as well which wheelchair 
techniques you can learn on the basis of your 
ability. Under no circumstances should you do 
anything with or in the product which you have 
not learnt to and have not mastered. 

 You, your carers and assistants should 

also seek advice from your therapists and 
doctors as well as the rehabilitation specialist 
dealer about the use and settings of your 
product as well as all the safety accessories 
available (e.g. anti-tipping supports and waist-
belt). It is then vital that the advice from 
doctors, therapists and the rehabilitation 
specialist dealer should be followed. 

 

 Overestimating your own ability or 

underestimating dangerous situations and 
actions with the product can result in serious 
consequences for you and other people. 

 If you are not sure how to handle the 

product or if technical faults occur, please 
contact your rehabilitation specialist dealer or 
PRO ACTIV before using it. 

 Make sure that when combining your 

product with equipment made by other 
manufacturers (e.g. seat cushions) that the 
serviceability of the individual components and 
the unit made up of them is ensured. You can 
get information on the suitability of a 
combination from the manufacturer of the third-
party components or from your rehabilitation 
specialist retailer. 

 

6 Intended 

purpose 

This product is designed for performance and 
recreational sports. Using the product as 
intended is essentially based on sport played 
by a handicapped or immobile person in team 
or individual sports (basketball, tennis and 
badminton) by moving which the wheelchair as 
far as is technically feasible. 

 

Acceptable usage and operating 
conditions/places of use 

Only use the product on a firm, level surface, 
such as concrete, asphalt, ash courts, sports 
hall flooring, tartan and indoor floor coverings. 
This product is intended for the non-public 
traffic area. Do not drive with this product on 
loose or uneven surfaces.  

The maximum permitted load of the product in 
its standard design is a 120

 

kg payload. 

Individual customisation can be made to 
accommodate a higher load; this will be 
indicated on the ratings plate. Please ensure 
that the load limit indicated on the ratings plate 
is not exceeded, even when transporting 
objects and carrying out strength exercises in 
the product. 

Содержание SPEEDY 4badminton





















































Отзывы: