7
5c. EMULSION-SPEED SELECTOR
This dial allows you to select the ASA/ISO setting for the internal
exposure meter.
Note: The 400 ASA setting should be used for 500 ASA
films.
5d. FILMING-SPEED SELECTOR
This dial makes it possible to set the camera at the desired filming speed
between 2 and 70 fps. If your
Classic Camera
is equipped with a power
lens, the camera will automatically correct the diaphragm for proper
exposure according to the shutter speed selected. This makes it possible
to change run speeds during filming.
(It is also possible to change filming
speeds with a “manual” lens, but the exposure will have to be calculated
separately.)
5)
WARNING!! As stated earlier,
The ELECTRICAL remote release
trigger must be used when shooting over 24fps or the camera
motor will burn out!
6)
WARNING!! Because the exposure indicator is tied to the film
speed selector, if you have the crystal sync set at 24fps but
have the speed selector set at a different speed ,i.e. 2fps,
then the exposure indicator will expose for 2 fps, not 24fps
like you wanted. Make sure that if you are shooting crystal
sync that the film-speed indicator is set for 24fps.
