background image

 

 

PRO8MM MAX 8 PROFESSIONAL CAMERA 

with CRYSTAL SYNC 

 

 
3a.  INTRODUCTION TO MAX 8 
 

The Max 8 Modification to the Classic Professional camera expands the 
frame size on the super 8 film master.  The viewfinder on the camera has 
the 16 x 9 frame marked for better framing during production.  This 

gives filmmakers the ability to work in a ratio, which is more compatible 
with High Definition & Enhanced for Widescreen DVD Mastering and 
Academy 35mm.  The new expanded frame gives a 20% increase in 
usable picture when framing for 1.78. 

 
Max 8 is compatible with all existing Pro8mm and Super 8mm film 
stocks.  The modification to the camera does not interfere with the ability 

to shoot a traditional 4 x 3 frame.  The ground glass has 1:78 frame lines 
to guide the cinematographer as well as the full 4 x 3 frame.  Max 8 
negative uses a ratio of 1:58, whereas traditional 8mm film uses a frame 

ration of 1:33. 
 
The Y-Front URSA Diamond flying spot scanner  at Pro8mm has been 

custom modified to  MAX8 1:58  scanning of Super8 so that the highest 
quality widescreen format transfer can be achieved.  Max 8 is unique to 
Pro8mm and can only be accomplished with the Pro8mm Max 8 Camera 
and Pro8mm Max8 Digital Mastering.  

 
 
b. C-CELL POWER POUCH SPECIFICATIONS 

 

Pro8mm

 

provides the discriminating cinematographer with the longest 

lasting battery pack. Our Ni-Cad 2400 milliamp battery pack will run 

approximately 50 rolls of film on a full charge, compared to the 250 
milliamp battery (5 rolls of film) of yesteryear. 
 

Note: Batteries will come with a full charge of power.  

 
 
c.  C-CELL POWER POUCH CHARGING INSTRUCTIONS 

 

1)

 

Plug the trickle charger into wall socket  

2)

 

Plug the battery into charger 

3)

 

Battery should be completely charged after 5 hours 
 

 

 
 
 

Содержание MAX 8




















Отзывы: