Programming
Programming
Programming
Thermostat Quick Reference
Set Time
1.
Press the
MENU
button
2.
Press
SET TIME
3.
Day of the week will be flashing. Use the or key
to select the current day of the week.
4.
Press
Next Step.
5.
The current hour is flashing. Use the or key to
select the current hour. When using 12-hour time, make sure
the correct a.m. or p.m. choice is selected.
6.
Press
Next Step.
7.
Minutes are now flashing. Use the or key to
select current minutes.
8.
Press
DONE
when completed.
(If using programming)
Programming
All of our programmable thermostats are shipped with an
energy saving pre-program. Your thermostat can be programmed
to have all the weekdays the same, a seperate program for Saturday,
and a seperate program for Sunday. There are four time periods for
each program (
WAKE, LEAVE, RETURN, SLEEP).
Set Program Schedule
1.
Select
HEAT
or
COOL
with the system key.
Note:
You have
to program heat and cool each seperately.
2.
Press the
MENU
button
(If menu does not appear first press
RUN SCHED
)
3.
Press
SET SCHED
. Note: Monday-Friday is displayed and the
WAKE
icon is shown. You are now programming the wake
time period for the weekday setting.
4.
Use the or key to make your time
selection for the weekday
WAKE
time period. If you want the
fan to run continuously during this time period, select
ON
with the
FAN
key.
5.
Then use the or key to make your setpoint selection
for the weekday wake period.
6.
Press
Next Step7.
Repeat steps 4 thru 6 for weekday
LEAVE
time period,
RETURN
time period, and
SLEEP
time period.
To customize your 5/1/1 program schedule, follow these steps
Weekday:
Repeat steps 4 thru 6 for the Saturday
WAKE
time period,
LEAVE
time period,
RETURN
time period, and for the Saturday
SLEEP
time period.
Saturday:
Repeat steps 4 thru 6 for the Sunday
WAKE
time period,
LEAVE
time period,
RETURN
time period, and for the Sunday
SLEEP
time
period.
Sunday:
Continued on next page...
1.
Select
HEAT
or
COOL
using the system key.
Note:
You have to pro
gram heat and cool each separately.
2.
Press
MENU
3.
Press
SET SCHED
.
Note:
Monday is displayed and the
WAKE
icon
is shown. You are now programming the
WAKE
time period for that
day.
4.
Use the or key to make your time selection for that day’s
WAKE
time period.
Note:
If you want the fan to run contin
uously during this time period, select
ON
with the
FAN
key.
5.
Then use the or key to make your setpoint selection for
that day’s
WAKE
period.
6.
Press
Next Step.
7.
Repeat steps 4 through 6 for
that day’s
LEAVE
time period,
RETURN
time period, and
that day’s
SLEEP
time
period.
To customize your 7 day Program schedule, follow these steps:
Weekday:
Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday
If in Auto you have the ability to switch between Auto Heat or
Auto Cool by pressing the System key. This can be done once
the current mode has reached its set-point. For example: If in
Auto Heat, the heat setpoint must be satisfied before the ther-
mostat will allow you to switch to Auto Cool. You can switch out
of Auto by holding down the System key. To get back into Auto,
you must toggle the System key to Auto.
A Note About Auto Changeover:
The programmable fan feature will run the fan continuously
during any time period it is programmed to be on. This is the
best way to keep the air circulated and to eliminate hot and cold
spots in your building.
A Note About Programmable Fan:
Repeat steps 4 thru 6 for the remaining days of the week.
Once a Reminder has been turned on and set, the elapsed
time can be checked by navigating to it’s tech setup step. The
elapsed time will then appear in the text field. It can also be
reset at that time by a press and hold of the
CLEAN
button for 3
seconds. Resetting an expired Reminder can be done without
entering tech setup, by a press and hold of the
CLEAN
button
for 3 seconds.
Reminders Note:
