7
6.
Insert the small 12 Volt DC plug of the power cable into the right side of the monitor.
7.
Plug the 12 Volt cigarette lighter plug into the vehicle’s cigarette lighter socket. To
maximize the effectiveness of the suction mount, it is recommended that the
application be performed under the following conditions:
•
Surface temperature should be between 21 and 38 degrees Celsius.
•
Application below 10 degrees should be avoided.
•
Application should not occur in direct sunlight.
Mounting should be protected from exposure to direct sunlight for a period of 24
hours.
Testing the System
1.
Check if the vehicle’s negative battery cable (ground) has been reattached.
2.
Turn the ignition key to the accessory position - do not start the vehicle.
3.
Engage the parking brake, and put the vehicle´s shifter in the reverse position. The
System should activate itself. If not, press the Power-button on the Monitor.
4.
If not already done: Please pair your camera(s) to the monitor (as described in
chapter OPERATION)
5.
After testing (and re-adjusting if needed) the unit, all cabling should be installed
permanently: Route all wires behind interior panels or under carpeting. Use the
supplied cable ties to keep excess wires neat and compact.
NOTE: UNDER EXTREME BRIGHT LIGHT CONDITIONS, THE SCREEN IMAGE MAY
TAKE A FEW SECONDS TO STABILIZE. PLEASE WAIT UNTIL THE IMAGE HAS
STABILIZED BEFORE BACKING UP.
Содержание APR043DC
Страница 52: ...52 NOTES ...
Страница 53: ...53 NOTES ...
Страница 55: ...55 ...
Страница 56: ...56 www pro user com ...