pg 2
1.2 Aluminum Carriers
The Aluminum Carriers
(Figure 2) are an integral
part of the Pro-Tracker®
Recovery System. They are
what screws into your arrow and holds the Radio Frequency
Transmitter (section 1.3). The Carriers are made from a 7075
aluminum alloy that is typically used in aerospace programs. It
is the strongest aluminum on the market and made to withstand
high velocity impacts. The Carriers will fit on any arrows using a
standard arrow insert.
You must cut your existing arrow 3 inches shorter (Figure 3) in
order to be the most accurate and effective. The Carriers have
a built-in threaded insert for the field tip or broadhead of your
choice. Crossbows use factory bolts; no shortening necessary.
After you have shortened your arrow, screw the Carrier into your
insert on the arrow. Your arrow is now the same length as before
and is able to hold the Radio Frequency Transmitter (section 1.3).
The Carriers are aerodynamically designed to compensate
for the weight and shape of the Transmitter. Meaning minimal
adjustments to your equipment. Ensure the opening of the Carrier
is facing upward. To adjust the opening direction, use an O-ring to
adjust the position.
Figure 2
Figure 3
Remove 3 inches from standard arrow shaft (compound only)
