- 8 -
MAXIMUM "PPM" READING AND OVERFLOW (FOR MODEL 7035):
The LCD will
display CO concentration up to 500ppm. Above 500 ppm, the LCD will display a
flashing "500".
RESET:
The CO alarm will automatically reset itself when the CO gas which caused
the alarm has cleared. However, the alarm will activate for at least 4 minutes if it is not
manually reset. You can silence the alarm by pressing the
TEST / RESET
button. If a
CO concentration of 70 ppm or greater continues to be detected, the alarm will activate
again within 4 minutes. See Section 2...
WARNING...If alarm signal sounds:... and follow instructions 1), 2), 3), 4).
7. WARNING:
Carbon monoxide alarms respond to the presence of CO. They do not detect
smoke. If the alarm does activate, follow instructions
1
to
4
under WARNING in Section
2
.
IF YOU HAVE BEEN AWAY FROM HOME and you return to find your alarms
sounding, DO NOT ENTER YOUR HOME. Call the Fire Department from a
neighbor's home.
DO NOT RE-ENTER YOUR HOME FOR ANY REASON UNTIL
YOU HAVE BEEN ASSURED THAT IT IS SAFE TO DO SO.
8. MAINTENANCE :
CLEANING YOUR ALARM
You can clean your alarm by using a vacuum cleaner hose to vacuum around the
openings on the alarm. The outside of the alarm can be wiped with a damp cloth.
AFTER CLEANING, TEST YOUR ALARM BY USING THE TEST BUTTON AND
CHECK THAT THE GREEN LED IS ON.
9. LIMITATIONS OF CARBON MONOXIDE ALARMS
Carbon monoxide alarms are devices that can provide an early warning of the
presence of CO gas at a reasonable cost. However alarms have sensing limitations
and may not always sound a warning in the presence of CO. The alarm will not operate
if the battery power is low or dead. CO alarms must be tested regularly to ensure that
they are receiving power and operating properly. Carbon monoxide alarms cannot
sense CO that does not reach the alarm, and therefore CO alarms may not detect CO
which is in another area of the home. Furthermore if the alarm is located on a different
level of the home or on the other side of a closed door it may not waken a sound
sleeper. The use of drugs and alcohol may impair ones ability to hear the alarm. If you
have a multi-level home, install CO alarms on each level of the home. If the alarm is
installed in a hallway and the bedroom doors are kept closed at night, install a CO alarm
in each bedroom.
Although CO alarms can help save lives by providing an early warning to the
presence of carbon monoxide, they are not a substitute for an insurance policy.
Homeowners and renters should have adequate insurance to protect their lives and
property.
!
