12
What’s In The Box |
User Manual
| Technical Data
Cleaning and Storage
Operation/Brushing Your Teeth
STOPPING THE BRUSH
Press the mode selector button at any time after the brush has
been operating for three seconds or more to end the cycle.
BRUSH EACH QUADRANT FOR 30 SECONDS
VarioSonic’s electronic timer is programmed for the ideal two minute
brushing session. Dividing your mouth into four sections, brush each for
30 seconds. VarioSonic will pause at 30 seconds intervals as a reminder
to move to the next quadrant.
USE GENTLE PRESSURE
Let the brush do all the work. Use only enough pressure to
maintain brush contact with your teeth and gums. This is a key
benefit of VarioSonic compared to manual toothbrushes in that
you experience deep, effective cleaning without exerting excess
pressure that can damage teeth and gums over the long term and
cause or exacerbate sensitivity.
VarioSonic is more effective and efficient than ordinary toothbrushes.
Follow these tips to ensure you’re enjoying the best brushing experience
every time.
SELECT A MODE TO BEGIN BRUSHING
Pushing the mode selector button will cause the brush to move
and begin its cleaning cycle. Press the mode selector button
according to the instructions on page 9 until you have selected the
desired cleaning mode.
