Full product range & more information:
www.lumenalights.com
USER MANUAL
Sol-Icon Professional Two Sided PIR Solar Path Light
THANK YOU FOR YOUR PURCHASE
PLEASE READ THESE INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION / MAINTENANCE
WARNINGS
•
If a fitting is found to be damaged, cease use immediately.
•
The unit may get warm whilst on for a period of time.
•
Always take care when installing your solar light.
•
Fitting must be mounted to a solid surface or using relevant anchor bolts / J-Bolts
•
This Solar Light will not charge correctly if the panel is behind glass or artificial light is used.
•
Ensure the waterproof bung is in place at all times, other than when turning the unit on.
•
Due to temperature difference in and outside the fitting, condensation may be present internally but will not affect use.
CLEANING & MAINTENANCE:
Occasional cleaning and care is recommended for this product. Wipe with a soft, slightly damp cloth to remove any surface dirt.
To maintain efficiency, specifically clean the solar panel and LED on a regular basis. Also, keep the solar panel free of debris and
snow to prevent reduced battery life or malfunction. Do not use abrasive cleaners or a lot of water as this could damage the
fitting. Please refer to our website for more information on the best way to clean different materials.
RETURNS:
If purchased from a 3
rd
party, please contact your supplier. If purchased direct, contact us by phone or email:
Lumena Lights Ltd, Centre 33 Long March, Daventry, NN11 4NR Tel: +44 1327 871161 Email: [email protected]
Our full returns policy is available on our website.
Waste Electrical Products should not be disposed of with household waste. Please check with your local authority or contact us
for more information. Please recycle packaging whenever possible.
Producer Registration Number: WEE/KC3440XY / BPRN0843
SPECIFICATIONS
Wattage:
20W
Lamp:
In-built SMD 3030 LED 40 pcs
Colour Temperature:
6000K (Daylight White) / 3000K (Warm White)
Lumen Output:
2000 lm (1000 lm per side)
LED Life Expectancy:
up to 50,000 hours
Sensor:
Light / Charge Sensor / 2 x PIR Sensors (1 per side)
Sensor Detection:
160˚ angle, 2
-8m distance
IP Rating:
IP65
IK Rating:
IK08
Battery Type:
Lithium 26650 - LiFePO4 6.4v/6000mAh/38.4wH (replaceable
–
5yr life)
Battery Charge Time:
10 hrs full sunshine (approx.)
Max Illumination Time at Full Charge:
Up to 4 nights (PIR mode)
Illumination Area:
Over 3m in all directions
Solar Panel:
9v / 3.5W Monocrystalline Solar Panel (11Wp front + 9Wp back)
–
20yr life
Materials:
Die Cast Aluminium & Tempered Glass
Weight:
4.5KG (approx.)
–
excludes mounting accessories
Mounting:
Internal Mounting Base + Ground spikes
Lighting Function:
1hr 100% + 2hrs 80% + 2hrs 50% + 9hrs 30%
Working Temperature:
-20
˚C ~
60
˚C
Included:
Solar Light, Internal Surface Mount + 4 Bolts, Washers & Spring Washers,
2x Ground Spikes with Bolts/Washers, 4x Anchor Bolts, Allen Key, Instructions
✔✔✔
3 YEAR
GUARANTEE
see website for
more details
220mm
800mm
90mm