pro.point 9040643, Руководство пользователя

Страница: 7 / 32

V1.0 Low-Profile Air Impact Wrench 9040643
Visit www.princessauto.com for more information 7
9. Do not use any additional force upon the wrench in order to remove
a nut. Excessive pressure could resulting in a serious injury, damage
to the tool, an accessory or the workpiece. Excessive pressure is
being applied if your tool runs smoothly under no load, but does not
run smoothly under load.
10. Never hold the drive, socket, drive extension or accessories during
impacting. Doing so increases the risk of cuts, burns or vibration
injuries.
11. Keep hands and fingers away from work area. Any part of body
coming in contact with moving parts could cause injury.
12. Use a suspension arm whenever possible.
13. The tool is not insulated against contact with live electrical conduits
or sources.
14. Install an in-line shutoff valve or regulator to allow immediate control
over the air supply in an emergency, even if a hose is ruptured.
15. Discontinue tool use if it does not work properly or air is leaking. Tag
or mark the tool as ‘defective’ or ‘out of service’ until repaired.
WARNING! Do not operate the tool if any part is
missing. Replace the missing part before
operating. Failure to do so could result in a
malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the Identification Key are included.
Make sure that all items in the parts list are included.
A Tip
B 360° exhaust
C Air regulator
D Trigger
E Grease fitting
F Air inlet