pro.point 8996928, Руководство пользователя

Страница: 34 / 76

8996928 Electric Pallet Jack V1.0
34 For technical questions call 1-800-665-8685
The upright walking switch is activated before the key switch or the interlock is
switched from On to Off when the upright walking switch is closed.
40
PUSH_SRO_FAULT 1212C-2503 Controller
Carry out the action before the switch is powered on, this fault can be ignored.
80
Mode fault Handlel
The tortoise button of the handle is faulty, and the tortoise button is detected to be
closed before the power is turned on.
81
Lift fault Handle
The up button is faulty, and the up button is detected to be pressed before the machine
is turned on.
82
Lower fault Handle
The down button is faulty, and the down button is detected to be pressed before the
machine is turned on.
83
BMS Communication Outage Handle
Lithium battery communication timeout,
• Lithium battery BMS is damaged.
• The communication line from the lithium battery to the handle is broken.
•
The communication module of the handle is damaged.
84 throttle_FAULT Handle
Improper sequence of throttle input.
85
Controller Communication Outage Handle
Controller communication is lost
86
LOW_BDI 1212C-2503 Controller
The battery discharge falls below the programmed threshold
87 Lift system failure Handle
The output of the pump station is running continuously, the lifting system is faulty, it
may be the fault of the rising micro switch
90
Over Voltage Lithium battery
The battery voltage is too high.
• The charger may be overcharged.
• There is a problem with the battery BMS.
•
The vehicle goes downhill for a long time, which is caused by the feedback current
charging.
91 Over Discharge Lithium battery
The battery is over discharged.