8975278
Wall-Mount Oscillating Fan
V1.0
6
For technical questions call 1-800-665-8685
b. Discontinue use if a power cord feels more than comfortably
warm while operating the device.
3. Keep all connections dry and off the ground to reduce the risk of
electric shock. Do not touch the plug with wet hands.
4. Prevent damage to the power cord by observing the following:
a. Do not pull on the cord to disconnect the plug from an outlet.
b. Keep the cord away from heat, oil, sharp edges or moving parts.
c. Never use the cord to carry the device.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a
malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage.
ASSEMBLY & INSTALLATION
NOTICE! It is the user's responsibility to be sure that the location and the
wall surface can handle the weight of this fan.
The hardware to mount the fan to a vertical surface is not included with
the fan.
1. Choose a location that can support the weight of the fan and that is
near a power outlet.
2. Use the wall bracket
s a template for marking the intended drill holes
on the mounting surface.
3. Drill holes through the mounting surface.
4. Drill completely through steel with a 9/32 in. drill bit at the
pre
-
marked locations. Attach the wall bracket
to the mounting surface with 1/4 in.
-
20 hex
bolts, 1/4 in. flat washers, 1/4 in. lock washers
and 1/4 in. hex nuts.
5. Mount the fan to a masonry surface with 1/4 in.
expansion type bolts or 1/4 in. masonry lag
screws with a shield that are designed to handle
the weight of this fan. Drill holes at pre
-
marked
Fig. 1
