V1.0
6 Ton Jack Stands w ith S afety Pin
8760449
Visit www.princessauto.com for more information
5
5. Inspect the device before each use. Do not use if it is bent,
cracked, damaged or has been subjected to a sudden or
unexpected (shock) load.
6. Ensure that all applicable pins, bolts and nuts are firmly tightened
before using.
7. Lift one end of the vehicle at a time to retain stability.
7.1 Do not lift both ends of a vehicle simultaneously.
7.2 Do not use jack stands to support the side of a vehicle.
8. Test that the vehicle is safely supported by the jack stands by
pushing the vehicle away from you.
8.1 Keep the vehicle at arm’s length when performing this test.
8.2 Ensure the workspace is clear of people and obstacles.
8.3 Provide enough room to escape the area should the vehicle
slip off the jack stands.
BEFORE LIFTING VEHICLES
1. Secure the vehicle before lifting. Set it in parking gear, engage the
parking brake and chock the wheels.
2. Support the vehicle on areas specified by the vehicle manufacturer
only.
3. Do not allow people to enter a vehicle that is being lifted or moved.
4. Lift the vehicle to a height that leaves enough room to place the
jack stands.
UNPACKING
WARNING! Do not operate the device if any part is missing.
Replace the missing part before operating. Failure to do so could
result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the Identification Key are included.
