V1.0
HITCH MOUNT VISE PLATE
8712952
Visit www.princessauto.com for more information
7
15. Drop an M10 bolt (#14) through each bolt hole.
15.1 Replace the bolts with longer bolts if necessary.
16. Secure each nut with a M10 nut (#15). The bracket is ready
for use.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical
replacement parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool handles clean, dry and free from oil/grease at
all times.
6. Maintain the tool’s labels and name plates. These carry
important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
7. Check to make sure that all hardware is tightly secured in
place before each use.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
STORAGE
When not in use for an extended period, apply a thin coat of
lubricant to the steel parts to avoid rust. Remove the lubricant
before using the tool again.
If the vise remains attached to the removed hitch mount vise
plate, both should be tied down and properly secured.