8708083
14 IN. METAL DRY CUT SAW
V1.1
8
For technical questions call 1-800-665-8685
10.2 Replace 2 prong outlet with a grounded 3-prong
receptacle, installed in accordance with the CE Code
and local codes and ordinances.
WARNING! All wiring should be performed by a qualified
electrician.
POWER CORD
1. Insert the power cord plug directly to the power supply
whenever possible. Use extension cords or surge protectors
only when the tool's power cord cannot reach a power
supply from the work area.
1.1 When operating a power tool outside, use an outdoor
extension cord marked W-A or W. These cords are rated
for outdoor use and reduce the risk of electric shock.
1.2 Use in conjunction with a Ground Fault Circuit
Interrupter (GFCI). If operating a power tool in a damp
location is unavoidable, the use of a GFCI reduces the
risk of electric shock. It is recommended that the GFCI
should have a rated residual current of 30 mA or less.
2. Do not operate this tool if the power cord is frayed or
damaged as an electric shock or surge may occur, resulting
in personal injury or property damage.
2.1 Inspect the tool's power cord for cracks, fraying or
other faults in the insulation or plug before each use.
2.2 Discontinue use if a power cord feels more than
comfortably warm while operating the tool.
2.3 Have the power cord replaced by a qualified
service technician.
3. Keep all connections dry and off the ground to reduce the
risk of electric shock. Do not touch plug with wet hands.
4. Prevent damage to the power cord by observing
the following:
Содержание 8708083
Страница 19: ...V1 1 14 IN METAL DRY CUT SAW 8708083 Visit www princessauto com for more information 19 PARTS BREAKDOWN ...
Страница 22: ...8708083 14 IN METAL DRY CUT SAW V1 1 22 For technical questions call 1 800 665 8685 ...
Страница 23: ...V1 1 14 IN METAL DRY CUT SAW 8708083 Visit www princessauto com for more information 23 ...
Страница 24: ...8708083 14 IN METAL DRY CUT SAW V1 1 24 For technical questions call 1 800 665 8685 ...