8662280
1,000 LB HYDRAULIC RAPIDLIFT TABLE CART
V1.0
10
For technical questions call 1-800-665-8685
STORAGE
1. Set the table on the lowest position while not in use. Store
in a dry location to prevent corrosion.
2. When not in use for an extended period, apply a thin coat
of lubricant to the steel parts to avoid rust. Remove the
lubricant before using the tool again.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
DISPOSAL OF HYDRAULIC FLUID
Do not drain hydraulic oil into the sewer system or dispose in
an uncontrolled location. Hydraulic fluid may take up to a year
to break down in the environment and the ingredients may still
be toxic. Contact your local municipality for proper disposal
instructions or locations.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does
not function properly or parts are missing. If unable to do so,
have a qualified technician service the tool.
PROBLEM(S) POSSIBLE CAUSE(S) SUGGESTED SOLUTION(S)
The table is
not lowering.
The pull rod (#45) is
disconnected from
the bolt (#48).
Reconnect the pull rod to
the bolt.
The control
lever is rigid.
The hex nut (#21) is
too tight.
Loosen the hex nut and
adjust the bolt (#48).