Item # 247668
FOUR TIER OCTAGON FOUNTAIN
Model # 24-23
Questions, Problems, Missing Parts? Before returning to retailer, call
our customer service department at 866-728-6187 from 9 a.m. – 5 p.m.
EST, Monday – Saturday, or e-mail [email protected].
Part Quantity
Top Fountain
1 pc
Upper Basin
1 pc
Middle Basin
1 pc
Under Basin
1 pc
Holder 1
pc
Pump 1
pc
Water Supply Tube
1 pc
Plastic Cover
1 pc
Warnings and Cautions
Warnings:
•
To reduce the risk of electric shock, connect pump only to a Ground
Fault Circuit Interrupter (GFCI) outlet.
•
Do not exceed the voltage shown on the pump.
•
Always disconnect the pump from the power source before performing
any maintenance or work on the pump or fountain.
NOTE: Diagram shown is for illustrative purposes only.
•
Inspect the power cord for damage before installation and/or
maintenance. Replace the entire pump if damage is found.
•
Do not remove the grounding pin from the power cord on pumps with a three-prong, grounded-type plug.
Cautions:
•
Do not install the fountain within 10 ft. (3.05 m) of a pool or spa. If the pump is connected to a Ground Fault Circuit Interrupter (GFCI) protected
circuit, the fountain can be installed no less than 5 ft. (1.52 m) from a pool or spa.
•
Use the pump only with portable, self-contained fountains no larger than 5 ft. in any dimension.
•
Use a proper power source as indicated on the pump label. Keep the cord away from high temperatures and/or heat sources.
•
Do not lift the pump by its power cord.
•
Keep the fountain out of reach of children.
•
Do not let the pump run dry. Pump should be completely submerged for proper operation and cooling.
•
Do not pump heated liquids.
•
Operate with freshwater only. Avoid heavily chlorinated water and water with high pH levels.
Preparation
Before beginning assembly, read all warnings and safety precautions. Remove parts from bubble warps and polyfoam. Compare parts with parts list. If
any part is missing or damaged, do not attempt to assemble or use the product. Contact customer service for replacement.
Estimated time for assembly is 15 minutes.
Tools required for assembly:
•
No tools required
Assembly Instructions
1
