V 1.0
420CC OHV GAS ENGINE WITH ELECTRIC START
8628265
HOW TO ADD FUEL
DANGER! Fuel is very flammable. Use extreme care when
handling or storing fuel. An ignition source contacting the
fumes or fuel may result in a fire or explosion and cause fatal or
serious injuries to you or a bystander.
1. Refuel outdoors or in a well-ventilated area and immediately
wipe up spills. Fuel can damage paint and plastic.
2. Stop the engine and position equipment on a level surface.
3. Let engine cool at least 2 minutes before removing the
fuel cap.
4. Clean the fuel cap (I) area of dirt and debris. Do not allow dirt
or water to enter the fuel tank.
5. Remove the fuel cap slowly to allow the pressure to equalize.
6. Check the fuel level.
7. Add fuel until it reaches the bottom of the metal collar
supporting the fuel strainer in the fuel tank (Fig. 2-1). Take
care to not overfill the
tank. It may be necessary
to lower the fuel level
depending on operating
conditions.
8. Reinsert the fuel tank cap
and tighten.
9. Wipe up any spilled fuel
before starting the engine or allow to evaporate. Spilled fuel
is both a fire hazard and an environmental hazard. Dispose of
the fuel soaked rags in a proper hazardous waste container.
ENGINE OIL
NOTICE! Engine oil is a major factor affecting engine performance
and service life. Non-detergent and 2-stroke engine oils will
damage a 4-stroke engine and are not recommended.
2-1
Fig. 2
Visit www.princessauto.com for more information
15
